AKCP’s family of sensor and control systems developed over the last 30 years are widely used in industrial applications. Anywhere you need to monitor sensors and control systems our network enabled devices are the first choice.
The sensorProbe+ series is a cost effective and robust solution that can act as a Modbus RTU <-> TCP/IP as well as Modbus RTU or TCP/IP <-> SNMP gateway. It can function as either Master or Slave through the addition of the optional Modbus EXP port on all SP2+ and SPX+ units.
sensorProbeX+ (SPX+) comes in a variety of standard configurations to suit your monitoring needs. Additional modules can be added or a complete custom unit can be built so you get only the features you want. Add a Modbus EXP port to monitor third party Modbus devices.
sensorProbe2+ (SP2+) is a compact device, with 4 sensor ports and Modbus TCP/IP support. Upgrade to the SP2+X and change 1 sensor port to an Expansion port which supports Modbus RTU.
Specifications
General Specifications | |
Modbus RTU | Modbus RTU connects through the Expansion port (EXP) as a 2-wire connection. |
Speed | 9600, 19200, 38400, 57600 and 115200 |
Parity | None, Even, Odd |
Stop Bit | 1, 2 |
Databit | 8 |
Modbus TCP/IP | |
Host | IP Address |
Port | 502, 1024-65535 |
Modbus Slave | |
Support Modbus Slave RTU and TCP/IP | |
Can poll up to 32 values with Virtual sensors and up to 3 PMS. | |
Functions | 0x01 - Read Coil Status |
0x02 - Read Input Status | |
0x03 - Read Holding Registers | |
0x04 - Read Input Registers | |
Data Type | 16 bits unsigned int |
16 bits signed int | |
32 bits unsigned int | |
32 bits signed int | |
32 bits IEEE floating point | |
Data ordering | low byte first, low word first |
low byte first, high word first | |
high byte first, high word first | |
high byte first, low word first | |
AKCP's Power Meter Sensor (PMS) |
The SPX+ and SP2+ include a specific interface to online up to three AKCP's Power Meters via Modbus RTU |
3rd Party Power Meters support is also possible but requires the purchase of a licences. | |
Modbus Notifications | The SPX+ and SP2+ support Modbus Write commands via the Notification feature * |
Functions | 0x05 - Write Single Coil |
0x06 - Write Single Register | |
0x0F - Write Multiple Coils (32 bits maximum) | |
0x10 - write Multiple Registers (2 registers maximum) | |
* Feature available soon | |
Modbus Master | |
Support Modbus Master RTU and TCP/IP | |
Functions | 0x03 - Read Holding Registers : 32 bits IEEE floating point value |
0x04 - Read Input Registers : 32 bits signed int value | |
Register Address List | All sensors monitored by the SPX+ or SP2+ have a Modbus register automatically assigned, and the user can edit the Modbus register assigned to the sensors. |
The register list can be consulted on the unit's WebUI page, in System >> Modbus |